Switching Off The Normal Troubleshooting; Defining The Unit For Humidity; Defining The Unit For Temperature - Bosch Rexroth WGM Operating Instructions Manual

20/46 Operation
Bosch Rexroth AG, RE 51550-B/09.2019

5.1.6.2 Switching off the normal troubleshooting

Here you can activate/deactivate the normal troubleshooting and error assessment.
The function Switching off troubleshooting (
troubleshooting and error assessment. Under certain circumstances this can lead to
dangers for operators and machines.
Normal troubleshooting is deactivated in the factory setting of the WGM.
The following options are available:
Deactivates the normal
troubleshooting.
(standard setting)
Important notice: If the measuring range is exceeded or sensor errors
occur, the measured value is frozen and all six LEDs in the status bar
flash. When the measured value is within the valid range again, the LEDs
stop flashing and the display is updated normally.

5.1.6.3 Defining the unit for humidity

Here the displayed unit symbol for the humidity is defined:
The following options are available:
Percent

5.1.6.4 Defining the unit for temperature

Here the displayed unit symbol for the temperature is defined:
The following options are available:
Degrees
Celsius
Notice: The measured value conversion and the adjustment of the
measurement range take place automatically. Nevertheless, the
corresponding switching and switch-back points must be checked.
) deactivates normal
e .
RR
Activates the normal
troubleshooting
Degrees
Fahrenheit