Establishing A Bluetooth Connection; Settings - Task Force Tips SHO-FLOW 1 Instruction For Operation And Maintenance

5.3

ESTABLISHING A BLUETOOTH CONNECTION

1. Ensure the SHO-FLOW is flowing the minimum rated flow rate to
turn on the device and start transmitting the Bluetooth signal.
2. Press scan button to begin searching for SHO-FLOW.
3. Press button with the matching device name to connect.
4. Press the CONNECT button.
(the name on the SHO-FLOW will match the listed
device on the screen)
5. Once communication has been checked for proper data transfer:
• Top bar will display the Bluetooth Icon
• The Device Name will update to the connected device
NOTE: The app will remember this device name. When the
app is disconnected, it will automatically search and connect
to that device if it is available. If too much time has passed a
popup will display holding the SHO-FLOW information until it
is dismissed. Begin flowing again and hit continue to resume
flow session or cancel to disconnect.
5.4

SETTINGS

The Settings screen is used to configure the app display using the desired flow units and other configuration values.
1. To return to this screen, press the MENU button.
2. Then, press the SETTINGS button.
©Copyright Task Force Tips LLC 2019-2021 8
tft.com/EXXXXXX
DEVICE NAME
Figure 5.3
LIE-100 January 29, 2021 Rev06