Guardian PROTEC Quick Start User Manual

G u a r d i a n
S A F E T Y P E N D A N T S
QUICK START USER GUIDE
READ THIS FIRST!
Your pendant has already been programmed by us.
It is working and ready to go!
Follow these steps so you will be ready in an emergency.
Step 1.
Turn your pendant on. Press the side button until it vibrates
(4-5 seconds), then release. The LED lights will flash showing
that it is turning on. (See illustration 1)
Step 2.
Connect the lanyard to the ProTec. Unless you plan to carry
it in some other way. (See illustration 2)
Step 3.
Press the SOS button until it vibrates (2-3 seconds), then
release. A voice prompt will announce, "Your alarm has
been activated.Cancel by pressing the SOS button."
(See illustration 3)
Step 4.
Cancel the Fall Detection by briefly pressing the SOS button.
After a fall is detected, the ProTec will play a beep for a brief
(a)
period. The beeps will stop once the usercancels the alert by
pressing the SOS button briefly (See illustration 3)
Step 5.
(c)
(b)
Recharge your ProTec by connecting the USB cable to
the wall plug and the other end to the ProTec cradle (See
illustrations 4, 5 and 6). When connected, the cradle will
have a red light and the Pendants LED lights will stay solid.
Turn over this Page for answers to FAQ