Advertisement
85368 Rev. C
PITCH PRO
Part #: 10540; 10541, 10542, 10543, 10544,
10545
Instruction Manual
Do not throw instructions away.
Read and understand instructions before
using this equipment.
2
Introduction
2
Applicable Safety Standards
2
Worker Classifications
3
Product Specific Applications
3
Weight Capacities
3
Maintenance, Cleaning, and Storage
3
Limitations
5
Compatibility
5
Components and Specifications
6
Installation and Use
8
Safety Information
9
Labels
10
Diagram
10
Inspection
11
Inspection Log
Advertisement
Table of Contents
Related Manuals for Guardian PITCH PRO 10544
Summarization of Contents
Introduction
Applicable Safety Standards
Product meets or exceeds applicable OSHA and ANSI standards for fall protection.
Worker Classifications
Defines roles like Qualified Person, Competent Person, and Authorized Person for fall safety.
Product Applications
Personal Fall Arrest
Details PitchPro use for personal fall arrest systems, load requirements, and free fall limits.
Travel Restraint
Explains PitchPro use in travel restraint systems to prevent reaching fall hazards.
Rescue/Confined Space
Covers PitchPro application in rescue and confined space scenarios for worker recovery.
Work Positioning
Describes PitchPro use in work positioning systems for supported work.
Weight Capacities
User Weight Range
Specifies the user weight range (100-420 lb) for all PitchPro applications.
Limitations
Fall Clearance
Details fall clearance requirements, including safety factors and deceleration distance.
Swing Falls
Addresses swing fall hazards and advises working close to the anchor point.
Installation and Use
Substrate Requirements
Specifies minimum thickness and fastener requirements for wood, metal, and concrete.
Roof Pitch Compatibility
Details compatible roof pitches for PitchPro installation.
Installation Guidelines
Provides essential guidelines for proper placement, loading, and application of PitchPro.
Safety Information
General Warnings
Highlights risks of non-compliance, equipment alteration, misuse, and specific workplace hazards.
System Selection and Use
Covers selection, installation, and use of fall protection systems by competent persons.
Fall Arrest Force Limitations
Specifies maximum allowable free fall distances for lanyards and SRLs.
Rescue and Suspension Trauma
Addresses rescue plan requirements and risks of sustained post-fall suspension.
Inspection
Pre-Use Inspection
Details daily inspection points for PitchPro deficiencies and work area conditions.
Periodic Competent Person Inspection
Outlines required 12-month inspections by a Competent Person and record-keeping.
Need help?
Do you have a question about the PITCH PRO 10544 and is the answer not in the manual?
Questions and answers