Advertisement

85368 Rev. C
PITCH PRO
Part #: 10540; 10541, 10542, 10543, 10544,
10545
Instruction Manual
Do not throw instructions away.
Read and understand instructions before
using this equipment.
2
Introduction
2
Applicable Safety Standards
2
Worker Classifications
3
Product Specific Applications
3
Weight Capacities
3
Maintenance, Cleaning, and Storage
3
Limitations
5
Compatibility
5
Components and Specifications
6
Installation and Use
8
Safety Information
9
Labels
10
Diagram
10
Inspection
11
Inspection Log

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PITCH PRO 10545 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Worker Classifications
Qualified Person
Definition of a person with credentials and experience in fall protection systems.
Competent Person
Definition of a trained and experienced person responsible for fall safety programs.
Authorized Person
Definition of a person assigned to work near potential fall hazards.
Product Specific Applications
Personal Fall Arrest
Use of PitchPro for supporting personal fall arrest systems.
Travel Restraint
Use of PitchPro in restraint systems to prevent reaching fall hazards.
Rescue/Confined Space
Use of PitchPro in systems for safely recovering workers from confined spaces.
Work Positioning
Use of PitchPro to support workers in positioning systems.
Limitations
Fall Clearance
Requirement for sufficient clearance to arrest a fall safely.
Swing Falls
Considerations for eliminating or minimizing swing fall hazards.
Installation and Use
Substrate Thickness Requirements
Minimum thickness requirements for wood, metal, and concrete substrates.
Substrate Fastener Requirements
Specifications for fasteners used with wood, metal, and concrete substrates.
Compatible Roof Pitch
Allowed roof pitch for installation of the anchor.
General Installation Guidelines
Key instructions for placement, loading, and use in HLL applications.
Safety Information
General Safety Warnings
Crucial warnings regarding compliance, alteration, misuse, and workplace assessment.
Equipment Selection and Use
Guidelines for selecting compatible harnesses, connectors, and proper use.
Rescue Procedures and Training
Requirements for rescue plans, training for authorized persons, and equipment use.
Fall Arrest Forces and Suspension Trauma
Information on forces absorbed during falls and effects of sustained suspension.
Inspection
Pre-Use Inspection
Detailed checks for deficiencies before each use of the PitchPro.
Work Area Inspection
Ensuring the work area is free of damage and hazards.
Periodic Competent Person Inspection
Mandatory inspections by a Competent Person every 12 months.

Table of Contents