Reset Button; Maintenance And Cleaning; Disposal - VOLTCRAFT PLC3000 Operating Instructions Manual

10. RESET BUTTON

If a data transfer does not work in a proper way or the pairing with the
home plug is not carried out, you can reset the home plug using the
reset button (7). For this press and hold the reset button for approx. 7
seconds. Release the reset button. All LEDs turn off shortly. Thereafter
the LED indicator on/off (5) turns on. You can also reset the home plug by
disconnecting it from the power outlet, then wait for approx. 60 seconds and
plug it in again.

11. MAINTENANCE AND CLEANING

• Disconnect the device from the mains supply before cleaning.
• Do not open the device and do not use any liquid agents for cleaning.
• Do not immerse the device in water.
• Apart from occasional cleaning, the device is maintenance-free. Use a
dry, soft, anti-static and lint-free cloth for cleaning.
• Do not use any abrasive or chemical cleaners.

12. DISPOSAL

Electronic devices are recyclable waste and must not be
disposed of in the household waste.
At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
37