Appendix B - Sd Card Update - Quest Controls TELSEC MP2x User Manual

Appendix B – SD Card Update
Overview
®
The TELSEC MP2x can be upgraded using a standard SD memory card. Use this procedure when you
need upgrade the system. Please contact Quest prior to performing the upgrade if you have any
questions or concerns regarding the upgrade files and or process.
Items needed:
1. SD memory card 2-8 GB in size formatted for use with Windows file format FAT32. (Cards
typically come this way)
2. PC or laptop with an SD card reader to allow transfer of files
Process:
1. Obtain the appropriate files from Quest
2. The program files are in a zip file (compressed) format. Open the file with "File Explorer" and
copy the "update" folder with its contents to the SD card.
3. When completed, your SD card should have a file folder with the name "update" on it and in
that folder will be all the files necessary to perform the update.
4. Remove the card from your PC and insert it into the SD slot on the front of the MP2x. Make
sure it clicks into place.
5. The system will take approximately 10-15 seconds to shut down the current processing and then
look for the update information.
6. The system will then reboot and rapidly flash the power LED to indicate it is performing the
update.
7. The system will reboot again after the update is completed and begin operating with the new
parameters.
8. Remove the SD card by pressing on it to unlatch the spring-loaded connection.
Rev 2.1 10/21/21 - 26 -
©
TELSEC MP2X User Guide