Preparing The Brewer For Use - Bunn HOME MODEL NHB Use And Care Manual

1. Open the lid and
place the funnel
beneath the
sprayhead.
3. Place the
decanter on the
warmer.
5. Wait three
minutes while
the tank
partially fills.
7. Remove decanter
from the warmer
and pour in
another full
decanter of water.
9. Close the lid.
11. Empty any water
that has collected
in the decanter.
13. Press the bottom
of the vacation
switch.
The next page leads you through the steps to

PREPARING THE BREWER FOR USE

NOTE: THE BREWER IS NOT READY TO PLUG IN.
Do NOT plug in until Step #11.
'BREWING DELICIOUS COFFEE'
2. Pour in a full
decanter of
water.
P2800
4. Close the lid.
(This starts the
flow of water
into the tank.)
P2767
6. Open the lid.
P0328
8. Place the
decanter on the
warmer.
P2770
10. Wait until water
flows from the
funnel.
P2769
12. Now plug in the
brewer.
P2799
14. Wait fifteen
minutes for the
water in the
tank to heat.
P0326
6
P2770
P2769
P2768
P2767
P2767
P0214
P0328