Olympia NC 455 Operating Manual page 16

Inserting Bank Notes
The bank note counter is a front loading device in
which the bank notes are loaded from the front.
Æ Insert the batch of bank notes on the infeed
tray [3].
Ê The bottom note in the batch of bank notes is
drawn into the bank note counter.
Complete the count to detect critical bank notes
The verification features are tested on both sides
of each bank note in one process.
Automatic/Manual Infeed
Automatic Infeed:
Æ Press the M/A button [22].
ÊAutomatic infeed of the bank notes is activated.
AUTO [25] appears in the display.
Manual Infeed:
Æ Press the M/A button [22] until AUTO [25] disap­
pears from the display.
ÊManual infeed of the bank notes is activated.
Æ Press the RESET button [18] to start counting.
Functions
Æ Select the required function.
Counting
This function counts the number of bank notes and,
depending on the sensor setting, their validity.
During the counting process, the quantity of bank
notes appears in the top display [24].
If the bank notes counted are left in the output
tray [6], counting resumes from the last number.
If the bank notes counted are removed from the out­
put tray [6] and a new batch of bank notes is placed in
the infeed tray [3], counting begins from
The previous count for the bank notes appears in the
bottom display [30].
Æ Press the COUNT button [17].
Ê The bank notes are counted without any verifica­
tion tests (UV, MG, MT, IR) and discharged in the
output tray [6].
16
Adding
When this function is activated, counting is continued
even if the bank notes counted are removed from the
output tray [6] and a new bundle of bank notes is laid
in the infeed tray [3].
This function is particularly useful in the case of large
batches of bank notes and for heavily used and
. creased bank notes. Smaller batches of bank notes
can then be counted in succession. The bank note
counter continues with the count of the bank notes.
Æ Press the ADD button [19].
Ê The Add function is activated/deactivated.
ADD [28] appears in the display.
Batch
This function causes counting to stop when a preset
quantity of bank notes has been counted. If the batch
of bank notes counted is removed from output tray
[6], the top display [24] skips back to
batch of bank notes is counted.
Æ Press the BATCH/C button [21].
ÊBAT [27] appears in the display. The preset num­
100
ber
Æ Use the digit buttons to enter the quantity you want
counted.
The number is freely selectable between
999
ÊThe number entered appears in the bottom dis­
play [30]. The bank note counter is ready for the
batch function.
Æ Insert the batch of bank notes on the infeed
tray [3].
ÊThe number of bank notes counted appears in the
top display [24].
If the bank notes in the infeed tray [3] run out
X 0
.
before the number defined is reached, the top
display [24] indicates the number counted up to now.
When more bank notes are then inserted in the infeed
tray [3], the process is resumed until the preset num­
ber is reached.
Press the BATCH/C button [21] to deactivate the
function.
Giu
appears in the bottom display [30].
.
X 0
and the next
1
and