Fault Condition; To Cancel Buzzer - Gent 800 Operator's Manual & Log Book

Fault condition

To Cancel buzzer

Cancel Buzzer
Typical fault indications:
Light indication
Fault
Fault
FRE Fault
18
796689 (4188-658) _ I1.1 /02.01
A fault condition is an automatic detection of
faults in the system requiring attention.
A fault detected in the fire alarm system is
given at the panel in the form of light
indication(s) and text message(s) on the
display, accompanied with an audible sound
from the local buzzer.
The table below shows individual
fault and associated message.
The panel will notify multiple faults
and disablements.
To silence the panel buzzer while the
system is in fault condition:
Y
Press the Cancel Buzzer button.
Any fault repair on the system
must be carried out by the
servicing organisation.
typical
message(s)
One example:
Loop device
removed
Fire routing
output O/C or
S/C fault
meaning
A device on the loop
circuit has been
removed.
There is an open or
short circuit fault
associated with the
fire routing output.