Gent 800 Operator's Manual & Log Book page 46

No.
17 Fire Protection
Activated
18 Pre Alarm
19
(yellow)
20 Verification
(yellow)
21
(yellow)
22
23 System fault
(yellow)
46
796689 (4188-658) _ I1.1 /02.01
label light
(red)
(red)
Delay
Fault
Power
(green)
operation and meaning
STEADY – The fire protection
output (fixed extinguishing) is
active.
OFF – The fire protection output is
not active.
Not used at present!
STEADY – There is at least one
coincidence zone / device in pre-
alarm.
OFF – There is no zone / device in
coincidence fire.
STEADY – The delay mode is
active.
OFF – The delay mode is not
active.
STEADY – The verification delay is
active and alarms are being
delayed from sounding.
OFF – The verification delay is not
active.
STEADY – There is at least one
fault in the system, view the fault log
for details, see page 18.
OFF – There are no faults.
STEADY – The mains and battery
supplies are healthy.
OFF – There is no mains supply
nor battery supply at the panel.
STEADY – There is a system fault
(Micro failure and non-volatile
memory corruption).
OFF – There is no system fault.