Miele PG 8581 Operating Instructions Manual page 120

Problem solving guide
Problem
The load items are flecked. The rinse aid container is empty.
The cleaning result is
unsatisfactory.
120
Possible cause and solution
Refill the container.

The rinse aid concentration is set too low.
Contact Miele Service and have the dispensing

concentration reset.
Wash carts, baskets, modules, and inserts were not
suitable for the load items.
Select transfer units, baskets, modules, and inserts

which are suitable for the task.
Transfer units, baskets, inserts, and modules were
incorrectly loaded or overloaded.
Arrange the load items correctly according to the

information in the operating instructions.
Avoid overloading the transfer units, baskets, modules,

and inserts.
The program was not suitable for the soiling.
Select a suitable program.

Or
Adjust the parameters to suit the task.

Soiling has been left to dry on the load items for too long.
Soiling should not be left on the load items for more than

6 hours before machine reprocessing.
A spray arm is blocked.
Ensure the spray arms are not obstructed when

arranging the load items.
Injector nozzles on the transfer units, baskets, modules, or
inserts are blocked.
Check the nozzles and clean them as necessary.

The filters in the wash cabinet are dirty.
Check the filters and clean them if necessary.

Wash carts, baskets, or modules were not correctly
mounted on the water connection.
Check the adapter.
