Table of Contents
Advertisement
• Inadequate products installed or used for safety-relevant applications may
produce unintended operating behavior and result in product or property
damage. For this reason, use a product in safety-relevant applications only on
condition that such use is specified and allowed in the corresponding product
documentation.
• Prior to commissioning the product, make sure that the end product (e. g. a
machine or line), into which Rexroth products are integrated, perfectly complies
with the country-specific provisions, safety regulations and standards applicable
to its use.
2.6 Product and technology-related safety messages
The safety instructions below is valid from chapter 6: Transport and storage to
chapter 15: Technical data.
Danger from excessively high pressure
Danger to life or risk of injury, damage to equipment.
Operating the motor above the permissible maximum pressure can cause
components to burst and hydraulic fluid to escape under high pressure.
▶ Operate the motor only within permissible maximum pressure.
Danger from suspended loads
Danger to life or risk of injury, damage to equipment.
Improper transportation may cause the Hägglunds motors to fall down leading to
injuries e.g. crushed or broken bones or damage to the product.
▶ Make certain that the forklift truck or lifting device has adequate lifting capacity.
▶ Never stand under or put you hands under suspended loads.
▶ Ensure your position is stable during transportation.
▶ Use Personal Protective Equipment, PPE (e.g. safety glasses, safety gloves,
suitable working clothes, safety shoes).
▶ Use suitable lifting device for transport and storage, installation and for
removal and repair. Make sure the motor is well mounted or anchored when
the lifting device is disconnected.
▶ Observe the prescribed position of the lifting strap.
▶ Observe the local Federal laws and regulations on work and health protection
and transportation.
Pressurized machine/system
Danger to life or risk of injury, serious injuries when working on energized
machines/systems. Damage to equipment.
▶ Protect the complete system against being energized.
▶ Make sure that the machine/system is depressurized. Please follow the
machine/ system manufacturer's instructions.
▶ Do not disconnect any line connections, ports and components when the
machine/system is pressurized.
▶ Switch off all power-transmitting components and connections (electric,
pneumatic, hydraulic, mechanical) in accordance with the manufacturer's
instruction and secure them against being switched back on.
Safety instructions
DANGER
RE 15300-WA, Version 06.2021, Bosch Rexroth AB
9/72
Advertisement
Table of Contents
