Bunn DUAL TF DBC W/SMART FUNNEL DUAL068000 Programming Manual page 18

Bunn coffeemaker user manual
Hide thumbs Also See for DUAL TF DBC W/SMART FUNNEL DUAL068000:
Table of Contents

Advertisement

PROGRAMMING THE BREWER (cont.)
BREW OZ (SETTING OR ADJUSTING BREW VOL-
UMES)
This function allows adjustment of the brew vol-
umes for each batch. The indicator signifies volume
in ounces per batch.
Procedure for modifying recipes - brew ounces:
Range: 10.0 oz to 400 oz for all three batch sizes
1. Press and hold upper right hidden switch (®) until
the display reads UNITS. Release the switch, then
press and release switch until the display reads
REVIEW RECIPES.
2. Press YES to proceed. The display should now
read:
NO NAME, along with MODIFY, SHOW and NEXT
(SINGLE brewers)
NO-NAME LEFT, along with MODIFY, SHOW and
NEXT (DUAL brewers).
3. Press and release NEXT to advance to the desired
coffee name to be modified.
REVIEW RECIPES?
NO
EXIT TO
NEXT FUNCTION
SCREEN
BREWERS
NO-NAME
MODIFY SHOW NEXT
BREW OZ. XX.X
(-)
DONE
(+)
3 BATCHES DONE?
NO
YES
% BYPASSS XX.X
(-)
DONE
(+)
SEE MODIFYING
BYPASS PERCENTAGES
ON THE FOLLOWING PAGE
OR PRESS AND RELEASE
ON/OFF SWITCH TO EXIT THE
BREW OZ: SETUP AND RETURN
TO THE MAIN SCREEN
4. Press and release MODIFY. The display should
read BREW OZ: and a batch light will be blinking.
Press and release the batch size to be modified.
5. Using (-) and (+), set the amount of brew water,
in ounces, to be dispensed over the grounds for
that particular batch size.
6. When finished, press another batch size and repeat
step 5 for that size for each batch size to be modi-
fied. Continue setting all batch sizes.
7. When finished setting all batch sizes, press and
release DONE. The display should read 3 BATCH
SIZES DONE?
8. If the three batch sizes are not correct, press and
release NO to return to the BREW OUNCES setup
screen and repeat steps 5, 6 and 7.
9. If the three batch sizes are correct, press YES. This
will advance to the % BYPASS function. Another
alternative is to press and release the ON/OFF
switch (either on DUAL brewers) to exit the BREW
OZ setup and return to the MAIN SCREEN.
YES
SINGLE
DUAL
BREWERS
NO-NAME LEFT
MODIFY SHOW NEXT
ADVANCES TO ALL OTHER
COFFEE NAMES PROGRAMMED
IN THE BREWER"S MEMORY
(COFFEE NAME)
MODIFY SHOW NEXT
WHEN THE LAST COFFEE
NAME IN BREWER'S MEMORY
IS DISPLAYED, PRESSING
NEXT WILL EXIT AND THE
DISPLAY WILL THEN READ:
THAT WAS THE
LAST RECIPE
Page 18
41342 080108

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Single tf dbc w/smart funnel sng0033000

Table of Contents