Appliance Description; Set-Up And Assembly Of The Appliance - Silvercrest SZP 25 A1 Operating Instructions Manual

Electric citrus juicer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
Using the appliance safely:
• In the event of danger, immediately remove the
power plug from the wall socket.
• Never use the appliance for purposes other than
those for which it was designed.
• Remove the power plug from the wall socket
when the appliance is not in use, when you re-
move parts and before cleaning the appliance.
• Do not use the appliance outdoors.

Appliance description

q
Lid
w
Large squeezing cone
e
Small squeezing cone
r
Upper fruit pulp sieve
t
Fruit pulp regulator
y
Lower fruit pulp sieve
u
Juice collector
i
Drive axle
o
Power cable with power plug
a
Appliance plinth
s
Power cable storage
Set-up and assembly of the
appliance
Important:
Ensure that the power plug is not in the power
socket before assembling the appliance. Otherwise
there is a risk that the appliance could start
unintentionally.
1. Unwind the power cable
s
cable storage
and secure it in the lateral
recess on the appliance plinth
2. Place the appliance plinth
slipfree surface.
o
completely from the
a
.
a
on a level and
Note:
Rinse all removable components thoroughly before
the first usage of the appliance (see chapter
"Cleaning and care").
3. Place the juice collector
of the appliance plinth
as far as it will go.
4. Place both parts of the fruit pulp sieve
into each other so that the fruit pulp regulator
protrudes through the recess. Both parts must
audibly engage.
5. Place the assembled fruit pulp sieve
the juice collector
must lie on the grip and catch in the rabbet on
the grip.
6. Press the small squeezing cone
i
axle
so that it engages.
Note:
If you want to press oranges or other larger fruits,
place the large squeezing cone
e
squeezing cone
small squeezing cone
the large squeezing cone
7. Insert the power plug into a wall power socket.
The appliance is now ready for use.
- 21 -
u
on the drive axle
a
and turn it clockwise
r
u
. The fruit pulp regulator
e
on the drive
w
over the small
. Ensure that the lobes of the
e
engage in the recesses of
w
.
i
r
y
/
t
y
/
on
t

Advertisement

Table of Contents
loading

This manual is also suitable for:

68958

Table of Contents