Silvercrest SRHG 15 A1 Operating Instructions Manual page 38

Technical data
Appliance description
GB
1 Restraining device
MT
2 On/off switch
3 Control lamp
4 Hot plates
5 Storage pouch
Before straightening
Operation
Preparation
36
Mains voltage
Power consumption
Protection class
Maximum Temperature
■ The hair should be clean, dry and free of styling products. Excepted are the
special products that support a straightening of the hair.
■ With very curly or very thick hair,
■ Comb the hair thoroughly before straightening so that there are no knots in it.
■ To achieve an especially good straightening result, spread special products
for hair straightening through the hair.
NOTICE
4 must be free of soiling. If necessary, clean them before
► The hot plates
taking the appliance into use (see chapter "Cleaning").
The appliance is locked, the restraining device 1 has been slid to the position
1) Insert the plug into a mains power socket.
2) Slide the on/off switch
The hot plates 4 are being heated up.
3) Wait for approx. 1-2 minutes, then the hot plates
4) Slide the restraining device
120 - 240 V ∼, 50/60 Hz
lightly moisten the hair.
2 to "I". The control lamp 3 glows.
1 to the position
max 15 W
II /
approx. 195°C
4 will be heated up.
.
SRHG 15 A1
.