Turn On/Off The Unit; Audio & Setting Adjustment; Eq Function; Loc On/Off - Pyle PLRVST400 User Manual

OPERATION
Turn ON/OFF the unit and mute function
Press /MUTE button to turn ON the unit. When the unit is on, shortly press this button for
mute on/o . Press and hold this button to turn o the unit.
Audio & Setting Adjustment
Shortly press SEL button and rotate VOL knob to show below:
ZONE A->ZONE B->ZONE C.
To select one of them and press SEL and rotate VOL to enter below items:
BAS (-7~+7)->TRE (-7~+7)->BAL (R7~L7)->EQ (POP-ROCK-CLASS-JAZZ-OFF)
->LOUD (o /on)->P-VOL (00-40)
In each item, press SEL and rotating the VOL knob to set them.
Press and hold SEL button and rotate VOL into the SETTING menu as below:
CT (indep/sync)->CLOCK (12/24)->BEEP (o /on)->AREA (USA/EUR)->DX (LOC)
->STEREO (MONO)
In each item, press SEL and rotating the VOL knob to set them.
When shows menu, press the DISP button to exit the menu.
P_VOL Setting
Setting the power on volume. If the volume at shutdown is small than the P-VOL. Next time
turning on the unit, the volume will be maintained at shutdown volume. If the volume at
shutdown is greater than the P-VOL. Next time turning on the unit the volume will be
restored to the P-VOL value.
CT (INDEP/SYNC)
CT INDEP: The clock works independently. It doesn't be synchronized to the RDS station's
time.
CT SYNC: The clock will be synchronized to the received RDS station's time.
Note: When the time was set by manual. The CT will go back to INDEP mode automatically.
CLOCK 24/12: Setting the time to 24H or 12H format.
BEEP (ON/OFF): Turn on/o the beep sound.
AREA (USA/EUR): To choose USA or EUROPE frequency.
DX/LOC (Distance/Local):
LOC: Receive the strong signal station only in seek station.
DX: Receive strong and weak signal station in seek the station.
STEREO/MONO:
STEREO: Receive FM stereo signal.
MONO: Change FM stereo to monochrome. It can reduce the noise when the signal is weak.
Dimmer Function
Press DIM button to set the brightness to high/low.
7
www.PyleUSA.com