The Appliance Components; Changing The Light Bulb; Maintenance - Kompernass KH 4225 Operating Manual

The appliance components

q Lamp head
w Bulbholder
e Lampshade
r Bulb
t Lamp clamp
y On/Off switch
u Power cable
Assembly and placing of the
lamp
We have preassembled parts of the lamp.
First put the components together com-
pletely before operating the lamp.
> First take all appliance components
from the packaging and remove all
packing foil and tape.
> Screw the lampshade
bulb holder w.
> Carefully screw the bulb
into the bulbholder w.
> Unwrap the power cable
sert the plug into a properly installed
household mains power socket.
> Secure the lamp with the clamp
a location that complies with the de-
tails given in the safety instructions.
> Turn and swivel the lamp head
the required direction.
> Press the On/Off switch
the lamp on. The light bulb r will
heat up quickly - after the lamp has
been switched off do not touch the
bulb until it has cooled down, other-
wise you will be burnt.
> Press the On/Off switch
again to switch the lamp off.
e onto the
r clockwise
u and in-
t at
q in
y to switch
y once
- 22 -

Changing the light bulb

CAUTION!
Check to ensure that the plug has
been removed from the wall socket.
If you do not, you could receive a
potentially fatal electric shock!
If the lamp has been in use, first
allow it to cool down completely.
This avoids the potential risk of
being burnt.
> Turn the bulb r anti-clockwise until it
can be removed from the bulb holder.
> Insert the new light bulb
bulb holder w and turn it clockwise
until it is firmly fitted.

Maintenance

Attention!
NEVER open any components of the
lamp - risk of electric shock! Arrange
for the appliance to be repaired by
specialists only.
The appliance is maintenance-free. No
form of maintenance, either on or in the
appliance, is intended for execution by
the user. In the event of malfunction or
apparent damage, make contact with
Customer Services.
r into the