Kompernass KH 4225 Operating Manual page 23

Metal clamp lamp
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
Always take hold of the power cable
by the plug. Do not pull on the cable
itself and never touch the power cable
with wet hands, this could result in either
a short circuit or you receiving an elec-
tric shock. Do not place furniture or
other items on the power cable and
ensure that the cable cannot be trap-
ped by, for example, the appliance it-
self. NEVER make a knot in the power
cable and do NOT bind it together with
other cables. Lay the power cable so
that no one can step on or stumble over
it. A damaged power cable can cause
a fire or an electrical shock. Check the
power cable from time to time. Should
it become damaged, arrange for it to
be replaced by the manufacturer, their
customer services or a suitably qualified
person.
Risk of fire!
When a storm and/or thunderstorm
with the risk of lightening threatens
please disconnect the appliance from
the mains power.
Use only light bulbs of the type detailed
in the Technical data. In particular, do
not use higher performance light bulbs.
Do not leave the appliance unattended
at any time when it is in use.
Only clamp the lamp to objects that
can bear the weight of the lamp and
will not be damaged by the clamp.
Do not position the lamp close to
inflammable objects, especially not
close to curtains or drapes.
Ensure that the lamp maintains an all
round minimum distance of 35 cm to
all surrounding objects. With areas on
which the light falls directly, a distance
of 50 cm must be main-
tained.
Do not place the lamp at locations
where, should it inadvertently fall off,
it would land on easily inflammable
materials, e.g. soft furnishings, beds,
waste paper baskets etc..
Place the lamp where it cannot be
knocked off or damaged by falling
objects.
Risk of accidents and injury!
Provide a secure positioning for the
appliance.
The lamp is not suitable for positioning
on tubes/pipes.
Do not operate the appliance if it has
sustained a fall or is damaged. Arrange
for the appliance to be checked and,
if necessary, repaired by qualified
technicians.
Before changing the light bulb, ALWAYS
wait for the bulb and the bulb holder to
cool down. Otherwise you run the risk
of being burnt on the hot elements.
This appliance is not intended for use
by individuals (including children)
with restricted physical, physiological
or intellectual abilities or deficiences
in experience and/or knowledge un-
less they are supervised by a person
responsible for their safety or receive
from this person instruction in how
the appliance is to be used. Children
should be supervised to ensure that
they do not play with the appliance.
- 21 -

Advertisement

Table of Contents
loading

Table of Contents