Safety Instructions; Building In Under A Hob - Brandt VI320BE1 Installation Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
Installing your dishwasher
Foam strip and soundproofing
seal.
To
provide
better
insulation on built-in appliances,
install the soundproofing seals and
the foam strip supplied with your
machine (depending on the model).

Safety instructions

For your safety's sake, never leave your dishwasher's door fully
open after use.
If the machine is operating incorrectly, disconnect it from the
electricity supply (remove the plug) or switch off the circuit involved
and close the water supply tap. Contact our After-Sales department.
If your dishwasher is being installed on a carpeted floor, make
sure to adjust the feet to leave a ventilation space under the
machine

Building in under a hob

If your worktop is fitted with a built-in hob over your
dishwasher, you must provide thermal insulation on top of the
machine. You can obtain this insulation kit from your dealer. Take care
to leave a space between the gas pipe and the top of your machine.
22
Installation of the adjustable
plinth on built-in appliances
noise
(depending on the model)
AVAILABLE FROM
THE AFTER-SALES
DEPARTMENT UNDER
REFERENCE: 32X0050
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vi320xe1Vm400xe1Vm400be1Vm400we1

Table of Contents