Typical downloaded file installation steps (this example is for the Windows XP/Vista
driver):
•
Double-click the file on the desktop
•
Click Run
For Windows Vista, if "Cannot create output file" is displayed, close the message
o
box, then right-click the file and select Run as Administrator
•
Click OK
•
Click Unzip
•
Click OK
•
Click Next to select English as the default language
•
Click either Install USB Touchscreen Drivers or Install Serial Touchscreen Drivers
This is determined by the choice made when the cables were connected
o
•
Ignore Enable Precalibration
•
Click Next
•
Click Yes to indicate that you have read and accept the license agreement terms
•
The files will install
•
Click Finish
•
If Calibration does not run automatically, see the Calibration section of this document
(see the Connections section of this document, above)