Using Your Hand Mixer - BETTY CROCKER BC-2208CMR Manual

Using Your Hand Mixer

INSERTING BEATERS AND DOUGH HOOKS
Be sure the unit is unplugged before
inserting Beaters or Dough Hooks.
Please note that the Dough Hooks are
designed to fit in the mixer only one
way.
Firmly grasp the mixer by the handle.
Insert the Dough Hook with the large
shaft ring into the right opening (the
larger opening). Push the Dough Hook in as far as it will go. The Dough
Hook will click as it locks into place. If the Dough Hook does not lock into
place, try inserting into the other opening. Repeat this process with other
Dough Hook in the left opening (the smaller opening). Plug the Mixer into a
120 volt 60 Hz AC only outlet. Your Mixer is now ready to use.
REMOVING BEATERS
Your Hand Mixer has a Beater Eject Button to allow easy removal of the Beaters
and Dough Hooks. Be sure the unit is unplugged and the speed switch is set to
"OFF" before removing the Beaters or Dough Hooks. With one hand holding
the Beaters or Dough Hooks, press the Beater Eject Button. The Beaters/
Dough Hooks will drop out of their locks for easy cleaning
CONTROLLING THE MIXER SPEED
To operate your Hand Mixer, simply move the
Speed Selector Switch from the "OFF" position to
the desired speed. Your mixer will beat at the speed
level you have selected.
During operation, it is possible to alter the speed
of the mixer by selecting a new speed setting. Your
mixer has seven speed levels: (1 to 6 plus Turbo).
6
BC-2208CMR Hand Mixer U&C-2018.indd 6 2018-10-19 9:48 AM