Table of Contents
Advertisement
4 Basic Information (General)
4.1 Proper use
The w eighing pl atform y ou pur chased i s i ntended t o d etermine t he w eight v alue o f
material t o b e w eighed. It i s i ntended t o be used as a " non-automatic w eighing
system", i.e. the material to be weighed is manually and carefully placed in the centre
of the weighing plate. As soon as a stable weight value is reached the weight value
can be read.
4.2 Improper Use
Do not use the digital weighing platform for dynamic weighing. In the event that small
quantities are r emoved or added to the m aterial t o be w eighed, i ncorrect w eighing
results c an b e di splayed due t o t he " stability c ompensation" i n the di splay uni t.
(Example: Slowly draining fluids from a container on the balance.)
Do not leave permanent load on the weighing plate. This may damage the measuring
system.
Impacts and overloading exceeding the stated maximum load (max) of the weighing
plate, minus a possibly existing tare load, must be strictly avoided. This may damage
the weighing plate or the digital weighing platform.
The digital weighing platform should never be operated in area where there is a r isk
of explosion. The serial version is not explosion protected.
The construction of the digital weighing platform may not be changed. This may lead
to incorrect weighing results, safety-related faults and destruction of the display unit.
The digital weighing platform may only be used as specified here. Other areas of use
must be released by KERN in writing.
4.3 Warranty
Warranty claims shall be voided in case
• Our conditions in the operation manual are ignored
• The appliance is used outside the described uses
• The appliance is modified or opened
• Mechanical damage or damage by media, liquids, natural wear and tear
• The appliance is improperly set up or incorrectly electrically connected
• The measuring system is overloaded
KDP-BA_IA-e-2012
6
Advertisement
Table of Contents
