Table of Contents
Advertisement
E
• Reconnect the weighing platform to the power supply,
• Restore connection to the PC (access point),
• Invoke the configuration website and check the IP-address.
(s. fig.:)
F
Close the configuration website, connect the PC to the selected network
G
Open the target software (e.g. KERN Balance Connection) and enter the
IP-address and port 23.
(s. fig.:)
For inquiry of the configuration allocated via DHCP, as well as to the specific/static
configuration of the IP-address, subnet-mask or the gateway, the KCP-commands
JNWx can be used.
KDP-BA_IA-e-2012
22
Advertisement
Table of Contents
