Ethernet; Read-Out The Ip Address - KERN KDP Operating And Installation Instructions

8.3 Ethernet

The weighing platform's factory setting uses DHCP, i.e. it connects automatically to
your network. The system can communicate using the UDP protocol (Port 187) and
also the Telnet protocol (Port 23).
To request and configure the weighing platform's IP address, connect it to the
computer using the USB cable (see "USB" chapter) and use the following commands
to request or set the network configuration, in this example with KERN
BalanceConnection:
8.3.1

Read-out the IP address

Download the KERN BalanceConnection:
https://www.kern-sohn.com/de/Balance%20Connection
If this message appears:
it is recommended to download and to install the KERN BalanceConnection as a zip-
file.
If this window appears, click „Nevertheless execute":
11 KDP-BA_IA-e-2012