Advertisement
Customer Care Europe, Middle East & Africa
SCCE Training Group
To save the tuning values you have to click the "Save" button in this window.
Afterwards start the tuning procedure again by pressing the "Measure" button, because tuning in PCN yet must be done.
Next appearing window is shown below. Press "OK" (it is not necessary to choose correct signal values).
After having done AM-suppression tuning in EGSM900 a second time, press the "Yes" button.
As effect the tuning values of EGSM900 will not be stored (but these tuning values have been stored before).
You will be shown the message box as on next page so that you can continue tuning in PCN band.
© NMP 2002
CONFIDENTIAL
NHM—2/5/6
3410
Date 20.11.2002
Checked by:
Customer Care E&A
9 (44)
Repairhints
Version 4.0 Approved
Approved by:
SCCE Training Group
Advertisement
