Advertisement
Customer Care Europe, Middle East & Africa
SCCE Training Group
As the next step open Software / Set Factory Values, choose Full factory and press Set:
Figure 2-5
You receive following message:
Figure 2-6
After pressing Yes you will get order to Restore Default User Settings – press ok. Now you can close the window shown on the
top of this page by pressing Cancel.
In the next step you have to open Software / Production Data Edit:
Figure 2-7
Rewrite product code and HW version out of your saved phone data into this window and press Save.
After this procedure you have to write back IMEI / SIMlock data and run SW-update once more. This time you have to choose
the correct flash file matching to your product code! Close the windows, which ask you to save user data to file by pressing No
and Restore Default User Settings by pressing ok after flashing.
Remember to retune RX/TX values and run energy management calibration, as all tuning data is lost after changing D301!
© NMP 2002
CONFIDENTIAL
NHM—2/5/6
3410
Date 20.11.2002
Checked by:
Customer Care E&A
16 (44)
Repairhints
Version 4.0 Approved
Approved by:
SCCE Training Group
Advertisement
