Maintenance And Troubleshooting; Maintenance - Dymo LabelWriter 300 User Manual

Maintenance

Caring for
Your
LabelWriter
Maintenance and
Troubleshooting
This chapter describes how to take care of your
LabelWriter and offers suggestions for identifying
problems that can occur when you use the LabelWriter
printers. If you can't solve the problem, this chapter also
describes how to contact DYMO for technical support.
The section below describes how to care for your
LabelWriter.
The LabelWriter printer is designed to give you long and
trouble-free service, while requiring very little
maintenance. You'll get the best possible performance
from your LabelWriter if you follow the setup instructions
that appear in the Quick Start Card and the procedures
described in this section.
You can easily clean your LabelWriter using just a few
simple items, which are listed below.
! Lint-free cloth.
! Isopropyl alcohol, diluted dishwashing detergent, or
diluted glass cleaner. (If you use glass cleaner, make sure
it does not contain ammonia.)
! Small, soft brush, such as a paint brush.
! LabelWriter cleaning card. One cleaning card (part
#60622) is included in your printer package. To purchase
additional cleaning cards, visit www.dymo.com or call
(800) 426-7827.
To keep your LabelWriter working properly, you should
clean it from time to time. Dusting the outside of the
printer occasionally will help keep foreign matter from
getting inside the printer. However, it is still a good idea to
periodically perform some basic interior maintenance.
Chapter 7
51