General Settings - Dymo LabelWriter 300 User Manual

Chapter 5: Setting Preferences
General
Settings
Units of Measure
Display Rulers
Show Shadows
Show Print
Progress Dialog
30

General Settings

The
Select the English (Inches) button to use inches as the
units of measure in the DYMO Label Software; select
Metric to use millimeters. The units you select are used
for the rulers you can display on screen, label dimensions,
and the position and size values displayed in the Object
Properties dialog box. See "Moving an Object to a
Precise Location" on page 18 for information.
Display Rulers
Select
rulers next to the label. The rulers are in inches or
millimeters, depending on the Units of Measure you have
chosen. To remove the rulers, uncheck this option.
Select Show Shadows to display a shadow around the
current label; uncheck the box if you don't want to display
a shadow. The shadow does not print on labels.
The Print Progress dialog box shows the number of
copies printed and the remaining number of copies to
print. The Print Progress dialog box appears each time
you print labels; if you hide it, the dialog box will not
appear.
Select Show Print Progress Dialog to display the Print
Progress dialog box during printing; uncheck this box if
you don't want the dialog box to appear.
options are described below.
to display horizontal and vertical