Sony RHT-G800 Operating Instructions Manual page 47

Formats supported by this
stand
Digital input formats supported by this stand are
as follows.
Format Supported/Not supported
Dolby Digital
DTS
Linear PCM (2ch)*
Linear PCM (5.1ch,
7.1ch)* (Only on
HDMI)
Dolby Digital Plus
Dolby True HD
DTS-HD
* Linear PCM accepts sampling frequencies of no
more than 48 kHz.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohms loads, both channels driven, from 200 -
20,000 Hz; rated 50 Watts per channel minimum RMS
power, with no more than 1 % total harmonic distortion
from 250 milli Watts to rated output.
Amplifier section
Reference Output Power
Surround mode
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs (Analog)
TV, AUDIO
Inputs (Digital)
TV, DVD/BD,
SAT
a
a
a
a
×
×
×
Front: 70 Watts + 70 Watts
(6 ohms at 1 kHz,
THD 10 %)
Center*: 70 Watts (3 ohms
at 1 kHz, THD 10 %)
Surround*: 70 Watts +
70 Watts (6 ohms at 1 kHz,
THD 10 %)
Subwoofer: 120 Watts
(3 ohms at 100 Hz,
THD 10 %)
Sensitivity: 600 mV
Impedance: 33 kohms
Optical
Coaxial, optical
HDMI section
Connector
Video inputs/outputs
Audio inputs
Speakers
Front
Speaker system
Speaker units
Center
Speaker system
Speaker unit
Surround
Speaker system
Speaker unit
Subwoofer
Speaker system
Speaker unit
HDMI 19pin-standard
connector
SAT, DVD/BD: 480i/480p/
576i/576p/720i/720p/
1080i/1080p
SAT, DVD/BD INPUT:
Linear PCM 7.1ch/
Dolby Digital/ DTS
2-ways, Bass reflex,
magnetically shielded type
Woofer: 4 × 7 cm (1 5 / ×
8
2 7 / inches) cone type
8
Tweeter: 2.5 cm (1 inch)
dia. Balanced dome type
Bass-reflex, magnetically
shielded type
4 × 7 cm (1 5 / × 2 7 /
8 8
inches) cone type × 2
Bass reflex, magnetically
shielded type
4 × 7 cm (1 5 / × 2 7 /
8 8
inches) cone type × 2
Bass reflex, magnetically
shielded type
10 cm (4 inches) cone type
× 2
continued
47
US