Starting The Programme, The Programmes' Different Cycles - Brandt VF 320 Operating Instructions Manual

Starting the programme, the programmes' different cycles

Présentation de votre lave-vaisselle
Starting the washing programme
immediately
Switch the machine on and select your
programme. Press the "Start" button.
Close the door and the programme will
start.
Delaying the start of the pro-
gramme
After selecting your programme, press
the "Delayed Start" button once or
twice depending on whether you wish
to delay the programme by 3 or 6
hours.
The corresponding indicator light illu-
minates.
Confirm by pressing "Start".
Programme end
The end of the programme is indi-
cated by a buzzer. The buzzer stops
as soon as you open the door.
The buzzer can be cancelled by
holding down the "Soak" button and
pressing "Start".
A single beep confirms the opera-
tion. If you wish to reset the buzzer,
repeat the same operation. This will
be confirmed by a double beep.
42
The buzzer is
automatically deacti-
vated when you select
a delayed start (the option
most often used at night).
Starting the programme, the programmes' different cycles Présentation de votre lave-vaisselle
Cancelling a programme
Hold down the "Cancel Start"
button for two seconds.
The programme will stop and you
can then re-programme.
ICS - auto-programme
advantages:
Depending on how you use it, this
programme optimises the machine's
operation to produce the best washing and
drying results, while saving time and energy.
Extra drying option all
programmes except Rapid:
You can activate this option by
holding down the "Intensive" but-
ton and pressing "Start".
The "3 h" light is unlit.
- Repress "Start" to select the
extra drying option; the 3 h light
starts flashing.
- Repress "Start" to cancel the option; the 3 h light goes out.
43