UBTECH ADIBOT-A User Manual page 21

Step 2 Manage the room requiring disinfection, and then deploy ADIBOT-A to start
disinfection.
Cautions:
◆ Plese clean up any inflammable and explosive objects and paper to prevent a fire caused by
high temperature on the surface of UV lamp,
◆ Please move away plants and animals in case the UV lamp can kill organic cells.
◆ Please make sure that the target place or object can be exposed to ultraviolet light. If any
furniture in the room is moved, a new round of disinfection will then be needed.
Step 3 Place the robot at the disinfection position in the room and the safety sign in front of
the door.
Please ensure that all the other doors and of the disinfection room is closed and all windows are
closed before starting disinfection.
Caution: The robot will return to the charging dock automatically after finishing the disinfection if
it was started at the dock.
Step 4 Select the in-place disinfection/auto-exploration disinfection solution (Refer to section
4.3.1 for details).
Step 5 After you tap to start disinfection on the tablet, ADIBOT-A will notify that ready for
disinfection, please leave as soon as possible and counting down in seconds. Be sure to leave the
disinfection site within the specified time to avoid being injured.
21 / 50
User Manual for ADIBOT-A
Shenzhen UBTECH Robotics Corp Ltd.