Advertisement
Installation Steps, Continued
Optional Check Camera Position
STEP ONE
On the tablet, open POV, but stay logged out.
STEP TWO
Tap the ellipsis menu
corner of POV, and then select "Camera Setup".
STEP THREE
Change the camera type to SmartCam (3rd
button) and tap Connect.
The app will look for cameras near you, and as
long as there is power to your camera, the app
will find it. Once it connects, you will see the view from the camera, allowing you to adjust
angle if necessary.
Optional - Use the "Camera IMEI" button to enter the camera's ESN found under the QR code
on the front of the camera, then tap Connect.
GOOD MOUNTING TIPS
•
Metrics visual detection happens within red square
area (image right)
•
Horizon line must be level with more road than sky
•
Field of view in green area
•
No occulsions in field of vision.
Good = level horizon, road in range
You will need to call Pedigree Install Support to finalize and confirm the installation.
PedigreeTechnologies.com | Support: (701)-499-0022
in the upper right
Install Confirmation: 701-499-0022
CameraView
View from camera
Bad = too much sky
JC400
Advertisement
