Advertisement
Installation Steps, Continued
Mount Camera
STEP ONE
Determine proper placement of camera on the front
windshield.
•
Center of the windshield behind the rearview
mirror area
•
Highest possible placement within the wiper
blade path
•
Avoid any overhanging exterior sun visor or
other materials on glass including rock chips
or cracks.
STEP TWO
Clean the mounting area on the windshield with alcohol (not provided). Remove all dirt, oil,
and grime.
STEP THREE
Remove protective plastic on the camera lens. (See image below.)
STEP FOUR
Clean the lens with a soft, lint-free cloth (not provided). The lens should be free of scratches,
dirt, and dust.
Rotating Camera Lens
PedigreeTechnologies.com | Support: (701)-499-0022
STEP FIVE
Orient the camera to the windshield.
•
Camera should be level to the horizon line.
•
Point the lens forward with a slight downward angle so the camera
picks up the front hood at the bottom of the frame.
•
Rotate the camera lense on the mount to adjust the position.
Mounting Plate back
6
STEP SIX
Match the small brackets on the mounting
plate with the knotches on the camera and
slide together to connect. Remove the red film
from the camera mount adhesive tape.
STEP SEVEN
Press the mount firmly to the windshield glass.
CameraView
JC400
Advertisement
