(3) The "IP Search" dialog appears. Confirm the number of the connected ATW‒R6200 S
receivers in the list and then click [Select All]. With all the boxes checked, click [OK].
The "Receiver Configuration" dialog appears and ATW‒R6200 S receivers with IP addresses
registered are displayed in the list.
Synchronization with the registered ATW‒R6200 S is then performed.
(4) Click Monitor Start button or click [Monitor Start] from the [File] list on the menu to start
monitoring ATW‒R6200 S.
5.1.2 Registering an ATW‒R6200 S in the existing network.
(1) From the [File] menu, click [Open Environment] to read the saved settings file.
(2) The "Receiver Configuration" dialog appears and the saved ATW‒R6200 S receivers are
displayed in the list. Click [IP Search...].