Buttons And Icons - Audio Technica 6000 Series Manual

4.2 Buttons and icons
There are buttons to start or stop monitoring. There are also BAND and MEMO icons. The
BAND icon indicates which frequency band the registered ATW‒R6200 S is using. In addition,
by clicking the BAND icon, you can change frequency bands. With the MEMO icon, you can
make a note for each registered ATW‒R6200 S.
Start monitoring button
Start communicating with the ATW‒R6200 S and display the data for the RF level, antenna
selection, audio level and battery indicator that is transmitted from the ATW‒R6200 S. Click
[Start]. Monitoring is started.
Start monitoring button
Stop monitoring button
Close the communication with the ATW‒R6200 S. Click [Stop]. Monitoring is stopped.
Stop monitoring button
MEMO Icon
Clicking the MEMO icon displays the list box. You can make a note for each registered ATW‒
R6200 S.
MEMO Icon
Type a memo and click [OK] to register it. The MEMO icon is enabled and hovering the
mouse over the MEMO icon displays the contents of the memo.