Table of Contents
Advertisement
(2) The "IP Search" dialog opens and the ARP table for the currently connected network is
displayed.
If the IP of the connected ATW‒R6200 S is not displayed, click [Refresh] to display the table
again. If the IP is still not displayed, check the network connection and settings. Click [Select
All] to register all the IP addresses on the ARP table. If you select individual IP addresses,
check the boxes next to the IP addresses. Click [OK] to return to the "Receiver Configuration"
dialog. The registered ATW‒R6200 S then displayed in the table on the dialog and
synchronization with the ATW‒R6200 S is performed.
Advertisement
Table of Contents
