Table of Contents
Advertisement
(a)
1
1. Spring preload adjuster
Spring preload setting:
Minimum (soft):
S
Standard:
S
Maximum (hard):
H
ESU13114
Adjusting the spring preload of the
sliding frame extension
EWS00751
WARNING
The left and right spring preloads must be
adjusted to the same setting. Uneven set-
tings can cause poor handling and loss of
stability.
The spring preload of the sliding frame exten-
sion can be adjusted by turning the adjusting
nuts.
To increase the spring preload, turn the ad-
justing nut in direction (a). To decrease the
spring preload, turn the adjusting nut in direc-
tion (b).
(b)
Control functions
(a)
(b)
1. Spring preload adjusting nut
2. Distance A
TIP
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The longer distance A is, the higher the
spring preload; the shorter distance A is, the
lower the spring preload.
Spring preload setting*:
Minimum (soft):
13 mm (0.51 in)
Standard:
13 mm (0.51 in)
Maximum (hard):
15 mm (0.59 in)
* Distance A changes 1.25 mm (0.05 in)
with each full turn of the adjusting
nut.
2
1
29
Advertisement
Table of Contents
