Table of Contents
Advertisement
Control functions
ESU10754
Drive guard
EWS00403
WARNING
Coming in contact with the rotating V-
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.
Make sure that the drive guard is in-
stalled securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.
ECS00831
NOTICE
Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.
The drive guard is designed to cover the V-
belt clutch and V-belt in case parts break or
come loose.
1. Drive guard
ESU10762
V-belt holders
Keep a spare V-belt for emergency use by
placing it into the V-belt holders provided.
22
1. V-belt holder
ECS00181
NOTICE
Make sure that the V-belt is installed se-
curely in the holders.
ESU10781
Carburetor coolant shut-off le-
ver
The carburetor coolant shut-off lever controls
the flow of coolant through the carburetor.
Make sure that the lever is in the "ON" posi-
tion to allow the coolant to flow and warm the
carburetor while the ambient temperature is
below 0 °C (32 °F).
1. Carburetor coolant shut-off lever
2. "ON" (open) position
3. "OFF" (closed) position
ECS00201
NOTICE
When operating the snowmobile in tem-
peratures above 0 °C (32 °F), move the car-
buretor coolant shut-off lever to the "OFF"
Advertisement
Table of Contents
