Overview Of I/O Connector Modules - Equinox Systems PPM3 Reference Manual

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EQ-IOCON-3 - MOD PPM3 CONN-3 I/O ATMEGA JTAG
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com

2.0 Overview of I/O Connector Modules

There are currently four different I/O Connector Modules available as detailed in the table below:
Order Code Description
EQ-IOCON-1 I/O Connector Module 1 (SPI) – Fast Connect Version
I/O connector module for In-System Programming (ISP) of Atmel microcontrollers
using SPI protocol (Fast Connect version)
This module plugs into the PPM3 and provides the relevant I/O connectors for SPI
programming of Atmel devices.
Features:
•
•
•
•
•
•
•
•
EQ-IOCON-2 I/O Connector Module 2 (SPI) – Wire-wrap version
I/O connector module for In-System Programming (ISP) of Atmel microcontrollers
using SPI protocol (wire-wrap version)
Features:
•
•
•
•
•
•
•
•
Plugs into suitable Equinox programmer eg. PPM3 Module
Atmel 10-way IDC ISP Header
Atmel 6-way IDC ISP Header
Equinox 10-way IDC ISP header
'Fast Connect' clip-in connectors for direct wiring to Test Fixture i.e wires
from bed-of-nails probe wires
Screw terminals for power connections
Target Vcc Status LED
Link to connect / isolate the programmer Vcc from the Target Vcc
Plugs into suitable Equinox programmer e.g. PPM3 Module
Atmel 10-way IDC ISP Header
Atmel 6-way IDC ISP Header
Equinox 10-way IDC ISP header
Single-in-line header with all programmer I/O brought out for wire-wrapping
to bed-of-nails probe wires
Screw terminals for power connections
Target Vcc Status LED
Link to connect / isolate the programmer Vcc from the Target Vcc