Burst Of Steam; Vertical Steaming - Singer SteamLogic Plus Instruction Manual

BURST OF STEAM

Burst of Steam function
is available for "High (
and "MAX" settings. For
extra steam to remove
stubborn wrinkles, simply
press the Burst of Steam
Button.
Note: It might be neces-
sary to press the Burst
of Steam Button a few
times before you can use the function. For optimum steam quality, do not operate the
Burst of Steam more than three times in succession.

VERTICAL STEAMING

For Burst of Steam in vertical position:
1
. Set temperature setting at "High (
2. Hold the iron in vertical position 15-30 centimeters (6-12
inches ) away from the garment.
3. Press the Burst of Steam Button.
WARNING: Do not apply steam to any clothes or fabrics that
are being worn by humans or pets. Temperature of steam is
very hot and can cause burns.
SPRAY
This function can be used to remove stubborn wrinkles.
1. Fill Water Tank as described in this manual.
2. Aim the Steam Nozzle toward the wrinkled garment.
3. Press the Spray Button.
4. Iron the garment.
Using Your SteamLogic Plus
Steam Iron
)"
•••
00:01
)"
•••
00:02
or "MAX".
00:01
15-30cm
ENGLISH – 7