Burst Of Steam - Singer Household Steam Iron Instruction Manual

Burst of Steam

This function is ideal for removing stubborn wrinkles or pressing extra-sharp
creases.
WARNING: Never IrON Or STeAm CLOTheS WhILe TheY Are BeINg
WOrN. Never DIreCT The STeAm JeT AT PeOPLe Or ANImALS.
• Fill the water tank as described in "Filling the Water Tank" section.
• Turn the iron on by pressing the Temperature Control Button. The
Temperature Display Light will flash with an audible beep sound.
• Select the or MAX temperature setting by pressing the Temperature
Control Button.
• When the selected temperature is reached, the Temperature Display Light will
stop flashing and an audible beep will sound. The iron is ready to use.
• While ironing, press the Burst of Steam button every 4 to 5 seconds. most
wrinkles can be removed within three bursts.
NOTE: It may be necessary to press the Burst of Steam button a few times to
start this function. For optimum steam quality, do not operate the Burst of Steam
more than three times after the Thermostat Light goes off.
Burst of Steam Button
8
burst of steam
Vertical Burst of Steam
This feature enables you to remove wrinkles from hanging garments (jackets,
coats, shirts), hanging curtains, or other hanging fabric.
WARNING: Never IrON Or STeAm CLOTheS WhILe TheY Are BeINg
WOrN. Never DIreCT The STeAm JeT AT PeOPLe Or ANImALS.
• Place the garment on a hanger.
• Fill the water tank as described in "Filling the Water Tank" section
• Turn the iron on by pressing the Temperature Control Button. The
Temperature Display Light will flash with an audible beep sound.
• Select the or MAX temperature setting by pressing the Temperature
Control Button.
• When the selected temperature is reached, the Temperature Display Light will
stop flashing and an audible beep will sound. The iron is ready to use.
• hold the iron upright, 6-12 inches away from the garment.
• Press the Burst of Steam button to direct steam at the area.
• Steam will penetrate into the garment, removing the wrinkles.
• For stubborn wrinkles, wait 4 to 5 seconds before pressing the Burst of
Steam Button again. most wrinkles can be removed within three bursts.
NOTE: maintain a distance of 6-12 inches from delicate fabric (synthetics, silk,
velvet, etc.), otherwise the fabric could be damaged.
It may be necessary to press the Burst of Steam button a few times to start this
function. For optimum steam quality, do not operate the Burst of Steam more
than three times after the Thermostat Light goes off.
Burst of Steam Button vertical burst of steam
9