Page 3
Einleitung Einleitung Zur Nutzung eines Gira TKS mit dem Controlpro wird in dieser Kurzanleitung die Einrichtung des TKS mit dem Gira Audioassistenten gezeigt. Audioeinstellungen Audio-Komponenten auswählen − Wählen Sie die Option „Mikrofon und Lautsprecher“ Lautstärke einstellen − Starten Sie den Lautstärke-Test und stellen Sie den Schieberegler nach Ihren Bedürfnis- sen ein.
Page 4
Audioeinstellungen − Übernehmen Sie die Einstellungen und schließen Sie das Fenster, um mit dem Assisten- ten fortzufahren. Mikrofonlautstärke abgleichen ■ − Drücken Sie den Start Button und stellen Sie den Schieberegler mittig ein. Sprachqualität optimieren ■ − Führen Sie den Sprachqualitäts- Test durch. Mikrofonlautstärke optimieren −...
Page 5
Konfiguration testen − Starten Sie den Konfigurationstest Audioassisten abschliessen − Schließen Sie den Audioassistent und haben Sie Spaß mit Ihrer Controlpro Türsprachein- heit! TKS-Communicator größer darstellen Machen Sie einen Rechtsklick auf die Verknüpfung des TKS Communicators und wählen Sie ■...
An der Türeinheit wird der Sprecher am Der Assistent verstärkt das Mikrofon des Controlpro in der richtigen Lautstärke wahr- Controlpro zu stark, siehe Punkt 5 Mikrofon- genommen aber mit einem Rauschen im lautstärke optimieren. Reduzieren Sie die Hintergrund. Mikrofonlautstärke (Schieberegler nach links) An der Türeinheit wird der Sprecher am Con-...
Introduction Introduction For using a Gira DCS with the Controlpro, this quick guide shows how to set up the DCS with the Gira Audio Assistant. Audio settings Select audio components − Select the „Microphone and Loudspeaker“ option. Adjusting the volume −...
Page 10
Audio settings Calibrate microphone volume ■ − Press the „Start“ button and adjust the slider in the middle.
Page 11
Test configuration − Start the configuration test Finish Audio Assistant − Close the audio assistant and have fun with your Controlpro intercom! Display TKS Communicator larger Right-click on the TKS Communicator shortcut and select Properties. ■ Switch to the Compatibility tab.
At the door unit, the speaker at the Control- The wizard amplifies the microphone of the pro is perceived at the correct volume but Controlpro too much, see point 5 Optimize with a noise in the background. microphone volume. Reduce the microphone...
Page 13
Controlpro et Gira TKS Controlpro et Gira TKS Notice abrégée...
Page 15
Introduction Introduction Cette courte notice présente la configuration du TKS (Interphone) avec l’assistance audio Gira, permettant l’utilisation d’un Gira TKS avec le Controlpro. Paramètres audio Sélectionner les composants audio − Sélectionnez l’option « Microphone et haut-parleur » Régler le volume sonore −...
Page 16
Paramètres audio − Vous pouvez à présent régler le volume dans l’onglet « Niveau ». Il doit être mis sur 0 ! − Enregistrez les paramètres et fermez la fenêtre pour poursuivre l’assistant. Égaliser le volume du microphone ■ − Appuyez sur le bouton Start et déplacez le curseur au centre. Optimiser la qualité...
Page 17
Démarrez le test de configuration Fermer l’assistant audio − Fermez l’assistant audio et profitez de l’unité de commande vocale de porte Controlpro ! Afficher TKS Communicator plus grand Cliquez avec le bouton droit de la souris sur le raccourci de TKS Communicator et sélection- ■...
La personne parlant à l'unité de porte L'assistant amplifie trop le microphone du Controlpro est entendue avec le bon volume Controlpro, voir le point 5 Optimiser le sonore mais avec du bruit en arrière-plan. volume du microphone. Réduisez le volume du microphone (déplacer le curseur vers la...
Need help?
Do you have a question about the Controlpro and is the answer not in the manual?
Questions and answers