Hardwire To The Vehicle Fusebox - Surfsight AI-12 User Manual

Hardwire to the vehicle fusebox

Hardwiring a dashcam to the vehicle's fuse box is one of the most
common installation methods to power on your dashcam. You can
either wire your dashcam to a 'constant fuse' (our preferred
method) or an 'ignition-switched fuse'.
! A constant fuse remains on and continues to provide power to
the dashcam when the vehicle is off. (Our preferred method)
! An ignition-switched fuse turns off when the vehicle is off,
relying on the battery while in parking mode.
NOTE: The hardwiring kit includes 2 wires; one that will goes to
constant or ignition switch and a ground wire that will go to a metal
ground bolt.
20