Clock - Philips FW-C55 Manual

All manuals and user guides at all-guides.com
RECORDING
4 Press DUB (HSD) once for normal
speed dubbing or twice (within 2
seconds) for high speed dubbing.
™ "NORMAL" (normal speed) or
"FAST" (high speed) will be
displayed, followed by "DUB" with
"< or >" scrolling left or right
depending on the tape side selected.
™ The appears on the display
HSD
during high speed dubbing.
• Dubbing will start immediately.
™ The starts flashing.
REC
5 Press Ç to stop dubbing.
Notes:
– Only å å å å å mode is available during
dubbing.
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
– You can listen to another source while
dubbing.
CD Synchro Start Recording
1 Load a blank tape into tape deck 2 and a
disc into a disc tray.
2 Press CD to select CD mode.
22
pg 01-26/C55/22-Eng new 22

CLOCK

• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
3 Press REC to start recording.
™ The starts flashing.
REC
• CD will start playback automatically.
4 Press Ç to stop recording.
Recording the mixed sound /
One Touch Recording
• During microphone mixing, you can
record the mixed sound on a tape in
View Clock
tape deck 2 except dubbing mode.
• For One Touch Recording, as soon as you You can view the clock (if it is set) if the
press REC, the current source (CD, system is in Standby mode or when any
TUNER or AUX) will be recorded on tape sound source is selected (CD, TUNER, etc.).
deck 2. The clock will be displayed for about 7
seconds.
1 Load a blank tape in tape deck 2.
2 Press REC to start recording. • Press CLOCK/TIMER briefly.
™ The ™ "PM 10:38 or 22:38" (the
starts flashing.
REC
3 Press Ç to stop recording.
Note:
– When you press RECORD while in TAPE
™ "--: : : : : --" will be displayed if the
mode, " SELECT SOURCE " will be
displayed. One Touch Recording is not
possible in TAPE mode.
MINI HIFI SYSTEM
PROGRAM SHUFFLE STEREO
BACK
REPEAT TIMER REC
NEWS T.A. AM MW FM LW FRONT
60Hz 250Hz 500Hz 2KHz 4KHz 8KHz
1KHz
STANDBY
ON
CLOCK/
TIMER CD1 • 2 • 3 BAND TAPE 1 • 2 CDR/VIDEO
CD TUNER TAPE AUX
PROG
PRESET
SEARCH • TUNING
STOP•CLEAR PLAY PAUSE PREV SIDE
SOUND NAVIGATION
INCREDIBLE DYNAMIC BASS
MIC
BOOST
SURROUND
DIGITAL
SOUND CONTROL
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "AM 12:00" or
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select clock
mode.
2 Press PROG (on the system only) to
current time) will be displayed select 12- and 24- hour mode.
depending on whether you have ™ If 12-hour mode is selected, "AM
selected 12- or 24-hour mode. 12:00" starts flashing.
™ If 24-hour mode is selected,
clock is not set. "00:00" starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
3/6/00, 11:43 AM
HSD
RDS
NEWS/TA
A. REV
NEXT
MIC
LEVEL
MIC
3139 116 19551