Table of Contents
Advertisement
All manuals and user guides at all-guides.com
A AM Loop Antenna
Connection
Connect the supplied loop antenna to the
AM ANTENNA terminal. Place the AM loop
antenna far away from the system and
adjust its position for the best reception.
B FM Wire Antenna
Connection
Connect the supplied FM wire antenna to
the FM ANTENNA 75 Ω terminal. Adjust
the position of the FM antenna for the best
reception.
Outdoor Antenna
For better FM stereo reception connect an
outdoor FM antenna to the FM ANTENNA
75 Ω terminal using a 75 Ω coaxial wire.
C Speakers Connection
• Connect the right speaker to Front
terminal R, with the colored wire to +
and the black wire to -.
• Connect the left speaker to Front
terminal L, with the colored wire to +
and the black wire to -.
• Clip the stripped portion of the speaker
wire as shown.
12 mm
unlock
lock
pg 01-26/C55/22-Eng new
7
D Subwoofer Out Connection
F Digital Out Connection
Connect the optional active subwoofer to
You can record the digital sound from the
the SUBWOOFER OUT terminal. The
CD, through this output, on any audio
subwoofer reproduces just the low bass
equipment with digital input (e.g. CD
sound effect (e.g. explosions, the rumble of
Recorder, Digital Audio Tape (DAT) deck,
spaceships, etc.). Be sure to follow the
Digital to Analog Converter and Digital
instructions supplied with the subwoofer.
Signal Processor).
Connect one end of the cinch cable (not
E Line Out Connection
(wireless
supplied) to the DIGITAL OUT socket and
the other end to the audio equipment with
ready)
digital input.When connecting the cinch
You can connect the audio left and right
cable, make sure it is fully inserted.
LINE OUT terminals to a optional CD
Recorder ANALOGUE IN terminals. This
G Connecting other
allows you to record in an analogue format.
You can also install additional optional
You can connect the audio left and right
front active speakers away from the
OUT terminals of a TV, VCR, Laser Disc
system (e.g. in another room) to reduce the
player, DVD player or CD Recorder to the
inconvenience of running long speaker
AUX/CDR IN terminals at the rear of the
wires across rooms. You can place as many
system.
remote speakers as you like provided they
operate at the same radio frequency.
Connect the wireless radio frequency
H AC Power Supply
transmitter to the LINE OUT terminals.
After all other connections have been
Place the active speakers at your preferred
made, connect the AC power cord to the
location. Be sure to follow the instructions
system and to the wall outlet.
supplied with the active speakers.
Note:
– Availability of wireless transmitter and
its peripherals are subjected to the
approval of local authorities. Please
check with respective local safety or
approving authority.
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or AA)
into the remote control as shown in the
battery compartment.
• To avoid damage from possible battery
leakage, remove dead batteries or
batteries that will not be used for a long
time. For replacement, use type R06 or
equipment to your system
AA batteries.
3/6/00, 11:42 AM
PREPARATION
7
3139 116 19551
Advertisement
Table of Contents
