Table of Contents
Advertisement
All manuals and user guides at all-guides.com
To start the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
Easy Set
EASY SET allows you to store all available
radio stations and RDS stations
automatically.
1 Press and hold STANDBY ON (on the
system only) for 5 seconds ; when the
system is in standby or demonstration
mode.
™ "EASY SET" will be displayed,
and followed by "TUNER" and then
"AUTO".
™ EASY SET will start searching for all
RDS radio stations with sufficient
signal strength and then followed by
radio stations on FM, MW and LW
band respectively. Weak RDS radio
stations may be stored in later
presets.
™ All available RDS and radio stations
with sufficient signal strength will be
stored. Up to 40 presets may be
stored.
2 The system will proceed to set the RDS
time automatically with the stored RDS
preset station.
• If no RDS station is available in the first
preset station, the program will exit
automatically.
pg 01-26/C55/22-Eng new
11
™ After a radio station is found,
Switching the system ON
"EASY SET" will be displayed
• Press CD, TUNER, TAPE or AUX.
and followed by "TIME".
• When searching RDS time;
You can also switch on the system by
™ "SEARCH RDS TIME" will be
pressing any one of the CD DIRECT PLAY
displayed.
buttons.
™ When RDS time is read, "RDS
TIME" will be displayed. The
Switching the system to
current time will be displayed for 2
standby mode
seconds and stored automatically.
• Press STANDBY ON or B on the
Notes:
remote control.
– EASY SET will start with the RDS
™ The system will switch to standby
station, if there are still presets
available, it will continue to store the
FM, MW and LW bands respectively.
Selecting the Source
– When EASY SET is used, all previously
• Press the respective source selection
stored radio stations will be replaced.
button: CD, TUNER, TAPE or AUX.
– The last preset radio station or the first
™ The display indicates the selected
available RDS station will appear on the
display when EASY SET is completed.
– If RDS station does not transmit RDS
Note:
time within 90 seconds, the program
– For an external source, make sure you
will exit automatically and the display
have connected the audio left and right
will show " NO RDS TIME ".
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX/
CDR IN terminals.
OPERATING THE SYSTEM
Selecting the Equalizer
Display
You can select the desired equalizer display
for the system. You must not press the DSC
or INCREDIBLE SURROUND button on the
system before using the JOG control.
• Adjust the JOG control to select the
desired Equalizer Display, NORMAL,
TOP DOWN, or NITE MODE.
™ The selected display will be shown.
NORMAL Display
mode.
PROGRAM
SHUFFLE
REPEAT
TIMER
NEWS
T.A.
AM
MW
TOP DOWN Display
source.
PROGRAM
SHUFFLE
REPEAT
TIMER
AM
MW
NEWS
T.A.
NITE MODE Display
PROGRAM
SHUFFLE
REPEAT
TIMER
NEWS
T.A.
AM
MW
Note:
– In NITE MODE, all lights will be
switched off and the display brightness
will be dimmed.
3/6/00, 11:43 AM
STEREO
BACK
REC
FRONT
HSD
FM
LW
60Hz
8KHz
250Hz
500Hz
1KHz
2KHz
4KHz
STEREO
REC
BACK
FM
LW
FRONT
HSD
60Hz
250Hz
500Hz
2KHz
4KHz
8KHz
1KHz
STEREO
REC
BACK
FRONT
HSD
FM
LW
60Hz
250Hz
500Hz
1KHz
2KHz
4KHz
8KHz
11
3139 116 19551
Advertisement
Table of Contents
