Draytek Vigor 2910 User Manual page 60

MAC Address of the True
IP DMZ Host
If you previously have set up WAN IP Alias on WAN1 interface while configuring PPPoE,
Static or Dynamic IP or PPTP (by accessing into WAN>>Internet Access), you will find
them in Aux. WAN IP list for your selection.
Enable
Private IP
Choose PC
54
If you choose Active True IP as the selection for DMZ host,
please type in MAC address in these fields.
Check to enable the DMZ Host function.
Enter the private IP address of the DMZ host, or click Choose PC
to select one.
Click this button and then a window will automatically pop up, as
depicted below. The window consists of a list of private IP
addresses of all hosts in your LAN network. Select one private IP
address in the list to be the DMZ host.
When you have selected one private IP from the above dialog, the
IP address will be shown on the following screen. Click OK to
save the setting.
Vigor2910 Series User's Guide