Draytek Vigor 2700 User Manual page 53

Index
Comment
Aux. WAN IP
Local IP Address
Status
To add or edit port settings, click one index number on the page. The index entry setup page
will pop up. In each index entry, you can specify 10 port ranges for diverse services.
However, if you previously have set up WAN Alias in Internet Access>>PPPoE/PPPoA or
Internet Access>>MPoA, you will find that WAN IP appeared for your selection.
Enable Open Ports
Comment
Local Computer
Vigor2700 Series User's Guide
Indicate the relative number for the particular entry that you want to
offer service in a local host. You should click the appropriate index
number to edit or clear the corresponding entry.
Specify the name for the defined network service.
Display the private IP address of the local host that you specify in
WAN Alias. This field will not appear if you did not specify any
WAN IP in the WAN Alias page.
Display the private IP address of the local host offering the service.
Display the state for the corresponding entry. X or V is to represent
the Inactive or Active state.
Check to enable this entry.
Make a name for the defined network application/service.
Enter the private IP address of the local host or click Choose PC to
select one.
47