Draytek Vigor 2700 User Manual page 31

PPPoE Pass-through
ISDN Dial Backup
Setup
ISP Access Setup
IP Address From ISP
Vigor2700 Series User's Guide
The router offers PPPoE dial-up connection. Besides, you also can
establish the PPPoE connection directly from local clients to your
ISP via the Vigor router. When PPPoA protocol is selected, the
PPPoE package transmitted by PC will be transformed into PPPoA
package and sent to WAN server. Thus, the PC can access Internet
through such direction.
For Wired LAN – If you check this box, PCs on the same network
can use another set of PPPoE session (different with the Host PC) to
access into Internet.
For Wireless LAN – If you check this box, PCs on the same
network through wireless connection can use another set of PPPoE
session (different with the Host PC) to access into Internet.
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click Internet Access
Setup > Dialing to a Single ISP to enter the backup profile.
Due to the absence of the ISDN interface in some models, the
ISDN dial backup feature and its associated setup options are not
available to them. Please refer to the previous part for further
information.
None - Disable the backup function.
Packet Trigger -The backup line is not on until a packet from a
local host triggers the router to establish a connection.
Always On - If the broadband connection is no longer available,
the backup line will be activated automatically and always on until
the broadband connection is restored. We recommend you to
enable this feature if you host a web server for your customers'
access.
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP. If
you want to connect to Internet all the time, you can check Always
On.
ISP Name – Type in the ISP Name provided by ISP in this field.
Username – Type in the username provided by ISP in this field.
Password – Type in the password provided by ISP in this field.
PPP Authentication – Select PAP only or PAP or CHAP for PPP.
Always On – Check this box if you want the router keeping
connecting to Internet forever.
Idle Timeout – Set the timeout for breaking down the Internet after
passing through the time without any action.
Usually ISP dynamically assigns IP address to you each time you
connect to it and request. In some case, your ISP provides service to
assign you the same IP address whenever you request. In this case,
you can fill in this IP address in the Fixed IP field. Please contact
your ISP before you want to use this function.
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box.
WAN IP Alias - If you have multiple public IP addresses and would
25